Heat Embossing videos inspired by one of my YouTube subscribers

It has been quite a long time since I’ve been in my craft room.  Mainly because I have had a mental block.

An e-mail request from one of my subscribers has dislodged the boulder in my head and I am busy experimenting.

My first video is in answer to the questions raised about finding the tools and products to do heat embossing.

You might say “I don’t have any rubber stamps to do heat embossing”.  Don’t worry about that.  The videos I’m creating are meant to get you working with embossing powder successfully.  Applying it over large surfaces so you can see the reaction and to know when you have achieved the desired results.

The second video I put up is using painter’s masking tape on paper.  Create a grid to watch the changes occur as the plastic resins and embossing ink react to heat.  In this video I have three FAILURES to show you the progression of my newly formed idea that wasn’t quite well thought out.  These failures are shown AFTER the successful application of my idea.

Currently, I’m working on a video featuring mailing labels and embossing powders.  This is more experimenting with the heat embossing medium.  The results are a mixed bag of tricks and I’m only moderately happy with the end results.

Heat embossing with mailing labels

Heat embossing with mailing labels

Stay tuned….there will be more to come.

Leslie

Get your Stripe On!

IMG_9418

I have been saving glass food jars for quite a while now.  Joe had requested them to be saved for his screws, nuts, bolts, and myriad other small things.  Uhm….they sit on a shelf in our hallway unused.  So….”Fair Game” you think?

There are several of these jars with a clear plastic label that is really HARD to get off.  Soaking in hot water doesn’t budge the label.

Clear label

Clear label

I tried using my brand new Tim Holtz heat tool.  All it managed to do was loosen the plastic label from the powerful glue.  Oh well, soak a paper towel in alcohol and let it sit for several minutes.  That should bust that glue loose.

IMG_9397 IMG_9398 IMG_9399

Uh-h-h-h.  Nope.  Alcohol didn’t cut it.  I had to bring out the “Big Guns” for sticky removal.

IMG_9400

This stuff cuts through the toughest stuff, and glue on this jar was pretty stinking tough.  With a paper towel, and a good sized squirt of the Goof Off,  I wiped the glue right off.  There were some areas that required a bit of scrubbing but it all came off.  There is a residue left behind from this stuff.  I cleaned the jar with another paper towel and a good sized dollop of alcohol which cut right through the Goof Off stuff.

IMG_9401

With some masking tape or painters tape, begin making your stripe pattern.  If you want narrow stripes lay the tape out on a cutting mat.  Using a metal ruler and an exacto knife cut the strips to the width you want to use.  I tried putting the tape around the neck of the jar and had nothing but a wonky line.  I had to go to my “Resident Guru” for his mechanical and strategic abilities.

IMG_9402 IMG_9403

After he got the tape “Just Perfect” (according to him) then I used several colors of the Adirondak Alcohol Ink from Ranger Industries and Tim Holtz.  Click on the image to enlarge it if you want to see the spacing and the mess.

IMG_9404

I left this to dry for 24 hours.  Mostly because I had run out of steam and energy.  Grrr!  I hate this being such a wimp!

The next day I took all the painters tape off and assessed my handiwork.  I didn’t like the one yellow stripe that was barely noticeable.

IMG_9407

If you don’t have a roll of this stuff already in your craft space….I think it is well worth your while to head to your hardware store or big box home improvement store.  This metal tape is really and truly very thin sheet metal with a glue backing.  This stuff is used by the heating and air conditioning people when they install furnace and a/c ducts in your home.

This tape is called “Shurtape Hold Strong”.  I’ve used this on many projects.  AND you can run this stuff through an embossing folder and your die cutting machine.  Totally awesome stuff!

IMG_9408

I cut the tape to the width I wanted using a paper trimmer.  Yes, you can use this stuff with your paper trimmer.  Leave the paper backing on before you cut it.  Or….you know what will happen.  It will stick and you will be saying a few words you would not wish to have repeated by the little ones in your home :/

Mark the tape at the desired length you want to span your jar.  Then Joe wanted a “Perfect” cut line so I brought him my little paper trimmer for him to use.  He’s so fantastic!  I just love this guy.

IMG_9410 IMG_9411

Once the metal strip has been applied to your glass jar, precisely or almost precisely :D, you will need to use a bone folder to smooth out the wrinkles in the metal tape.  This will also make the tape stick fully to the jar and not come loose later on.

I would suggest you spray your newly created beauty with a sealer.  I use a Krylon “Triple Thick Crystal Clear Glaze” that is good for craft projects.  Give your jar a couple coats of this stuff.  Take it outside first.  Don’t spray in the sun or you will get “Orange Peel” texture.  Once sprayed, bring it in the house to finish drying for a glassy smooth finish.

IMG_9374

I’ve read that this stuff, the Krylon Clear Glaze, will even make your beautiful creation dishwasher safe.  Hand wash the first time though to make sure the metal tape doesn’t have a problem.

I have a few touch ups to do on mine before I spray it with the glaze.  So, do you think you might want to try something even more adventurous than stripes?  If you give this a try leave me a link in the comments section.  I may be totally inspired by you!

Leslie