I don’t know when to stop the tweaking.

I thought I had finished the bulletin board yesterday.  The project was then handed off to Joe to add his expertise.

Joe's turn to work on the bulletin boardHe is doing some purging in his office.  He has decided to part with some of his stuff and sell it on eBay.  This frame is quite large and he had to make room for it on the kitchen table.

“Glazier Points” are going to be inserted into the back of the frame.  These will help hold the bulletin board inside the frame and keep it there when Carissa pushes the pins in to hold her important notes.

Glazer PointsHere is an “artistic” shot of the works.  Setting the glazier points.  It takes skill and someone that is not as ham fisted as I am.  I bend these things pretty bad when I do it so it has become Joe’s job because he has the right touch.

Over the shoulder view

Joe’s job complete, this puppy isn’t coming out of the frame at all.  Nice and secure!

Securely fastened

This morning I went into  my room to see how the Beacon’s 3 in 1 glue did with the push pins.  Some are holding well with this glue….

Beacon's 3 in 1 glueHowever, some are not.  Just pulling the pin from the foam core by the attached decorative piece resulted in the pin remaining in the foam core.

Beacon's 3 in 1 glue didn't work on the plastic back of this pieceTime to get the “big guns” out and use the heavy duty E-6000.

E-6000 Industrial glue

This morning I added some pink ribbon with pearls to the frame.  I used hot glue to attach it.

Pink ribbon with pearls

There is something missing……looks like there is too much open space.  After attaching the ribbon it seems that the “art piece” is an after thought.

After adding the ribbon

Time to fill up the empty space with more Graphic 45 Le’ Romantique images.

Adding more Graphic 45 imagesThat looks better…maybe.

I had to cover the back of the frame with brown paper.  Hide the glazier points, rough cut wood, and anything else.  Make it look a bit more professionally put together.

Brown paper to the back of the frame

And, of course, I had to “sign” the piece 😀

My "signature"

All that remains to do is attach a hanger piece so it can be mounted on a wall.  This will be handed off to Joe once again for the final touch.

I will restrain myself from any further tweaking of the piece.

How often do you look at something you have made and decide that it is not quite finished, after you have finished it?

Enjoy your crafting time.  My crafting time is near an end for a while 😦  Time to get back to my day job.

 

Advertisements